HD-9STX

In stock

SKU

5175862

$4,000.00

9,000-lb. Capacity / Narrow Width / High Lift

The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

More Height in Less Floor Space

The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.

With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.

Features & Specs

More Information
Model Description	9,000-lb. Capacity / Narrow Width / High Lift
Features	9,000-lb. maximum lifting capacity CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493 Freestanding design Narrow-width High-rise Perfect for parking, storage and service Runways accommodate narrow and standard vehicles Runways include rail-kit for optional accessories Electric / hydraulic power system Single hydraulic cylinder mounted underneath runway Fully enclosed lifting cables, safety locks and sheaves Internal anti-sway slider blocks in each column Oversized self-lubricating cable rollers Features heavy-duty 3/8" aircraft cable Rugged 1.25" roller axles Multi-position safety locks in each column Adjustable lock ladders Runways feature non-skid surface Push-button pneumatic safety release Independent backup slack-cable safety latches Customizable power unit location Removable approach ramps for additional drive-under clearance Longer approach ramps for low-ground clearance vehicles Optional drive-thru ramps available Optional drip trays available Optional solid deck available to increase storage capacity Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45) ETL Approved
Style	Standard Length Runways, Narrow Width, High Lift
Lifting Capacity	9,000 lbs. (4,082 kg)
Minimum Runway Height	4.5" (114 mm)
Maximum Rise	82" (2,083 mm)
Maximum Lifting Height	86.5" (2,197 mm)
Time to Full Rise	50 seconds
Width Overall	100.25" (2,546 mm)
Outside Length	198" (5,029 mm)
Overall Length	224" (5,690 mm)
Height of Columns	100" (2,540 mm)
Width Between Columns	89.75" (2,280 mm)
Drive-Thru Clearance	76.5" (1,943 mm)
Runway Width	19" (483 mm)
Length of Runways	188" (4,775 mm)
Width Between Runways	37.5" (953 mm)
Runway Centerline	56.5" (1,435 mm)
Outside Edge of Runways	75.5" (1,918 mm)
Rated Capacity	135" (3,429 mm)
75% Capacity	115" (2,921 mm)
50% Capacity	95" (2,413 mm)
25% Capacity	80" (2,032 mm)
Locking Positions	15
Lock Spacing	Every 4" (102 mm)
Power Unit	220 VAC / 60 Hz / 1 Ph
Shipping Dimensions	190" X 22" X 41"
Noise	45 dB