XPR-10AXLS

In stock

SKU

xpr-10axls

As low as $5,435.00

10,000-lb. Cap. / Asymmetric / Adjustable Width / Screw Pads / High Rise

The XPR-10AXLS model adds 6″ of lift and extends the overall height by 6″. Taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The XPR-10AXLS Offers Extended Height PLUS 75″ Lifting Height

10K car lifts don’t offer taller lift carriages or get easier to work under than this. If you need maximum security and an extended working height that’s ideal for taller individuals, you need the BendPak XPR-10AXLS. This particular two-post lift features an absolutely massive 75″ cylinder stroke, which means we did more than just extend the columns for the sake of overhead clearance. We actually lift the bottom of the vehicle 6"" higher than our standard 10K lift height. True safety requires taller carriages. Higher carriages eliminate balance issues that come into play when lifting trucks and SUVs.

This model is truly something to get excited about. If your shop has the overhead clearance—at least 13’—the XPR-10AXLS might be the best lift you ever purchase. The big n’ tall techs in your shop won’t forget it!

Features & Specs

More Information
Model Description	10,000-lb. Cap. / Asymmetric / Adjustable Width / Screw Pads / High Rise
Features	Lift arms shown with optional foot guards 10,000-lb. lifting capacity Expandable top beam accommodates wide or narrow configuration Double-telescoping screw pads offer increased versatility Padded overhead safety shutoff bar Single-piece columns Dual hydraulic direct-drive cylinders Automatic arm restraints Lowered arm tube supports Maintenance-free UHMW load bearings Oversized 59″ tall carriage for superior strength and durability Electric / hydraulic power system Large, 17″ x 19″ A36 steel base plate Self-lubricating dura-glide UHMW polyethylene bearing system Single-point safety release Safety locks in each column spaced every 3″ Automatic overhead shutoff Plated arm restraints and arm pins for rust prevention Heavy-duty 1/2″ aircraft-quality equalizer cables Oversized cable sheave diameter reduces cable fatigue 4-piece 63 mm stackable adapter set comes standard ALI Certified
Configuration	Asymmetric Clearfloor
Adjustable Width	Yes
Lifting Capacity	10,000 lbs. (4,536 kg)
Rise	75" (1,905 mm)
Rise + Pad	79.75" (2,026 mm)
Rise + Pad + Adapter	82.75" (2,102 mm)
Minimum Pad Height	4.75" (121 mm)
Time to Full Rise	50 seconds
Height Overall	157" (3,988 mm)
Width Overall	137" (3,480 mm) or 145" (3,683 mm)
Outside Columns	133.25" (3,385 mm) or 141.25" (3,588 mm)
Inside Columns	106.25" (2,699 mm) or 114.25" (2,902 mm)
Drive-Thru Clearance	93.75" (2,381 mm) or 101.75" (2,584 mm)
Floor to Overhead Switch	147" (3,734 mm)
Front Arm Reach (MIN)	23.5" (597 mm)
Front Arm Reach (MAX)	43.75" (1,111 mm)
Rear Arm Reach (MIN)	40.25" (1,022 mm)
Rear Arm Reach (MAX)	58" (1,473 mm)
Max Load per Arm	2,500 lbs. (1,134 kg)
Floorplate Height	N/A
Floorplate Width	N/A
Screw Pad Adjustment	2" (51 mm)
Power Unit	220 VAC / 60 Hz / 1 Ph
Shipping Dimensions	162" x 24" x 34"
Noise	45 dB